SiteMap
+
Manufacturer+
TAKASHIMA HIGH SPEED
WIRE STRAIGHTENING MACHINE
WORKS CO.,LTD.

TAKASHIMA HIGH SPEED STRAIGHTENING MACHINE

   
Ø0.1-Ø3.2    Ø2.5-Ø6.0   Ø4-Ø9    Ø6-Ø28
 
The picture expanded when the photograph was clicked can be seen.
       
    Capacity(mm)
Ø13-Ø28
TCH-25-W

TCH-25-W

FOR HIGH TENSILE STRENGTH WIRES(W)

Feed Speed(m/min)
5-20
    with Variator
    Optimum for processing
wires high in tensile
strength.Since twisting
is prevented by causing
the front and rear
straighteners to turn
clockwise and counterclockwise,
sophisticated products can be
obtained.
       
       
TCH-25-FC

FLYING CUT TYPE(FC)

Capacity(mm)
Ø13-Ø28
TCH-25FC

Feed Speed(m/min)
20

The flying cut completely
eliminates roll slip marks ,
local swelling in the spinner
section, and twice cutting.

 

The round blade to round
blade cutting system causes
the cross section to be cut
almost at right angles, so
that it is ideal for processing
wires that require high
precision, such as wires
supplied to automatic milling
machines.
       
    Capacity(mm)
Ø9-Ø20
TCH-20

TCH-20

AIR CLUTCH TYPE(TCH)

Feed Speed(m/min)
20-60

with Variator

    OPTION
Antivibration device
Never causes twice cutting
Air clutch shearing solves
double cut and end sweelling!
       
      TCH-20D

TCH-20D

AIR CLUTCH TYPE(TCH)

Capacity(mm)
Ø9-Ø20

Feed Speed(m/min)
15-40
with Variator

    OPTION
Antivibration device
Air clutch shearing solves
double cut and end sweelling!
       
       
    Capacity(mm) TCH-20F

TCH-20F

FOR SPECIAL SHAPED WIRES(F)

Th. 4-12
Wd. 8-32
Feed Speed(m/min)
30
   

Exclusive for flat, square
and special shaped wires,
this machine employs
a leveler straightening
system that consists of
a vertical straightening
roller and horizontal
straightening roller, capable of providing high precision.

       
      TCH-20 Cutting Machine

TCH-20 Cutting Machine

It is a device that cuts bar at equal intervals.

 

Processed Material
Ø9-Ø20
other shape
Bar material of 2-6M

Cutting length
60-500mm
       
       
    Capacity(mm)
Ø6-Ø14
TCH-14L-FC

TCH-14L-FC

FLYING CUT TYPE(FC)

Feed Speed(m/min)
10-30
with Variator
OPTION
    LEVEL
       
       
TCH-14

AIR CLUTCH TYPE(TCH)

Capacity(mm)
Ø6-Ø14
TCH-14
Feed Speed(m/min)
30
Never causes twice cutting.
       
       
  Capacity(mm)
Ø6-Ø14
TCH-14D(NS)-FC

TCH-14D(NS)-FC

SHORT LENGTH CUTTING TYPE

Feed Speed(m/min)
10-40
NS clutch cutting system

       
     
    Capacity(mm)
Ø6-Ø11
TCH-11
Feed Speed(m/min)
30-80

TCH-11

AIR CLUTCH TYPE(TCH)

with Variator

Min cutting length(mm)
OVER  50
    Air clutch shearing
solves double cut and
end sweelling!!
       
       
      TB-1
    Capacity(mm)
TB-1

STANDARD TYPE
Ø6.0-Ø14
Min cutting length(mm)
OVER  50
    Feed Speed(m/min)
   

30-80

       
       
      TB-2
    Capacity(mm)
TB-2

STANDARD TYPE
Ø6-Ø11
Min cutting length(mm)
OVER  50
    Feed Speed(m/min)
    30-80
       
Ø0.1-Ø3.2    Ø2.5-Ø6.0   Ø4-Ø9    Ø6-Ø28
UP