 |
 |
|
|
|
TC-3AL-W-NS
FOR HIGH TENSILE STRENGTH WIRES(W) |
Capacity(mm)
Ø4-Ø9 |
 |
Feed Speed(m/min)
10-30
|
| |
|
with Variator |
| |
|
Optimum for processing
wires high in tensile
strength.Since twisting
is prevented by causing
the front and rear
straighteners to turn
clockwise and counterclockwise,
sophisticated products can be
obtained. |
| |
|
|
|
|
| |
|
|
 |
TCH-9SP3M
Cutting, Pressing & Both End Threading Complex Machine
With Automatic Positioning Device |
Capacity(mm)
Ø4-Ø9 |
Feed Speed(m/min)
40 |
| |
| |
|
STUD BOLT THREAD CUTTING
MACHINE
(incorporating with TCH-9SP) |
*User friendly processing:
Just input the bolt length,
threaded length on both
ends and number of bolts
desired(Example; 16 nos)
Machine stops automatically
after processing the number input.
*Eliminates cutting and setting miss.
*Overall length : 420-3,050mm
*Number of processing bolts:14-40 RPM |
| |
| |
|
|
|
TCH-9SP1.5M
Cutting, Pressing & Both End Threading Complex Machine
With Automatic Positioning Device |
Capacity(mm) |
 |
| W 5/16 , W 3/8 |
Feed Speed(m/min)
50 |
| |
| |
|
STUD BOLT THREAD CUTTING
MACHINE
(incorporating with TCH-9SP) |
| |
|
*User friendly processing:
Just input the bolt length,
threaded length on both
ends and number of bolts
desired(Example; 16 nos)
Machine stops automatically
after processing the number input.
*Eliminates cutting and setting miss.
*Overall length :
95-1,500mm
*Number of processing bolts:14-40 RPM |
| |
|
|
|
|
| |
|
|
|
| |
|
Capacity(mm)
Ø4-Ø9 |
-FC.gif) |
| TCH-9S(L)-FC
AIR CLUTCH TYPE(TCH)
FLYING CUT TYPE(FC) |
Feed Speed(m/min)
10-30 |
| |
|
The flying cut completely
eliminates roll slip marks,
local swelling in the spinner
section, and twice cutting.
The round blade to round
blade cutting system causes
the cross section to be cut
almost at right angles, so
that it is ideal for processing
wires that require high
precision, such as wires
supplied to automatic milling
machines. |
| |
|
|
|
|
| |
|
|
|
| TCH-9S(L) AIR CLUTCH TYPE(TCH) |
Capacity(mm)
Ø4-Ø9 |
.gif) |
Feed Speed(m/min)
30-80 |
with Variator
OPTION
Gauging and dividing device
Antivibration device
|
| |
|
|
|
|
| |
|
Capacity(mm)
Ø4-Ø9 |
-P.gif) |
TCH-9S(L)-P
CUT & PRESS TYPE |
Feed Speed(m/min)
40 |
with Variator
|
| OPTION |
| |
|
NC servo positioning ruler |
| |
|
|
|
|
| |
|
|
|
| TC-3AS(L)-P
CUT & PRESS TYPE |
Capacity(mm)
Ø4-Ø9 |
 |
Feed Speed(m/min)
40 |
| |
|
|
|
|
| |
|
|
|
| |
|
Capacity(mm) |
 |
| |
|
Th. 2-6 |
| Wd. 6-20 |
TCH-9F
FOR SPECIAL SHAPED WIRES(F) |
Feed Speed(m/min)
10-30 |
| |
|
Exclusive for flat, square
and special shaped wires,
this machine employs a
leveler straightening
system that consists of
a vertical straightening
roller and horizontal
straightening roller, capable
of providing high precision. |
| |
|
|
|
|
| |
|
|
|
| TC-3AS(L)
STANDARD TYPE(L) |
Capacity(mm)
Ø4-Ø9
|
 |
Feed Speed(m/min)
40 |
| |
|
|
|
|
|
Ø‚0.1-Ø3.2 Ø2.5-Ø6.0 Ø4-Ø9 Ø6-Ø28
UP |
 |
